Using a dedicated printer for each kiosk can come in handy in many situations. Whether you have a busy reception or you have multiple entrances to your location, giving each kiosk it's own printer will ensure your visitors have a smooth, efficient check in experience. 


Before you set begin set up

  • The example uses a 1:1 ratio of printer to kiosk. It is possible to set up any combination of printers to kiosks (example 3 kiosks to 2 printers)
  • The AirPrint option is only available when using AirPrint enabled printers. If you are unsure of your printer's features, please check your instruction manual
  • Ensure the printers you want to connect are on the same network as the kiosk they will be connected to. Example Kiosk 1 and printer 1 must be on the same network and Kiosk 2 and printer 2 must both be on the same network 

Connect your printers

Step #1:
Set up to Kiosk 1 to Printer 1. If you have not yet done this, please go here to set up an Airprint printer or here to set up a printer using Print Proxy.

Step #2:

Access the device settings for Kiosk 2, scroll to the Proxyclick app, click to open the settings. Ensure the Print enabled toggle is green (this should be done for all printers).

Step #3:

Copy the IP address from the printer you would like to attach to the kiosk and enter it into the Overwrite IP address defined in Dashboard field. 

The Printer Name is not mandatory, you do not have to complete that field in order to use connect the kiosk to the printer.

Once the new IP address is in the field, you are all set!  

Repeat as needed to connect additional printers and kiosks.

For access to this feature using AirPrint, you will need a Prime subscription or higher.
For access to this feature using Print Proxy, you will need Prime plus Efficiency or higher.


If you have any questions or feedback please contact support@proxyclick.com or send us a message on the live chat.


Did this answer your question?